3D can mockup template
Your label printed all the way round a drink can that turns in the browser, the seam at the back and the metal showing wherever the art is transparent.
Three-step workflow
From source files to live URL
- 1
Upload the labels
Each image is one design on the same can. Label artwork 2.2 times as wide as it is tall fills the print band exactly, and its two ends meet at the seam at the back.
- 2
Set the can
Pick the can colour and a glossy or matte finish. Printed colour keeps a slight metallic sheen, and transparent areas leave the bare metal showing.
- 3
Share the range
Publish and send one link, or embed the can with an iframe. The visitor steps through every flavour with a tap, the arrow keys or the dock.
Why this template
Built for can mockup specifically
- The label runs 360 degrees around the straight wall, with the seam at the back like a wrapped can.
- A narrower image, a logo or a badge, is printed centred on the front and leaves the metal bare around it.
- Artwork at another ratio is scaled to cover the band and cropped, never stretched.
- Autoplay, loop and auto-rotate turn the project into a display for a release page.
- The counter shows which design out of how many, so a distributor knows the size of the range.
FAQ
Questions about the can mockup template
Is the mockup a print proof?
No. It shows proportion and placement. It does not check bleed, dielines or colour against a printer profile, so the production file still goes through your printer's template.
Which can sizes are available?
Three heights on the same diameter: short (250 ml), standard (355 ml) and tall (473 ml). On Auto the can follows the label, so a tall beer label gets a tall can. Other diameters and formats are not available.
Can I link to my shop from the can?
Not from the can itself. This project type has no clickable hotspots, so put the shop link next to the embed on your page.
Keep exploring
Pages other readers found useful
Create a 3D beer can mockup
A new label on a can that turns, the whole release in one link.
ReadUse caseCreate a 3D drink can packaging mockup
Every flavour on the same can, for a client presentation or a product page.
ReadGuide3D can mockup
The whole label, all the way round a can that turns, with the seam at the back.
ReadGuideCan label mockup: preparing the artwork
The label ratio, the seam and when a logo belongs on bare metal.
ReadTemplate3D mug mockup template
Your design printed around a mug that turns on its own, with the handle, the back and the inside all visible.
ReadFor your teami3dify for design & branding agencies
Stop sending clients PDF style guides they skim.
ReadStart with this template free
3 free projects, 50 MB, no credit card. Pro at $3/month removes the i3dify branding and unlocks unlimited.
Use template free